|
The GPRS core network is the central part of the general packet radio service (GPRS) which allows 2G, 3G and WCDMA mobile networks to transmit IP packets to external networks such as the Internet. The GPRS system is an integrated part of the GSM network switching subsystem. Network provides mobility management, session management and transport for Internet Protocol packet services in GSM and WCDMA networks. The core network also provides support for other additional functions such as billing and lawful interception. It was also proposed, at one stage, to support packet radio services in the US D-AMPS TDMA system, however, in practice, all of these networks have been converted to GSM so this option has become irrelevant. PRS module is an open standards driven system. The standardization body is the 3GPP. ==GPRS tunnelling protocol (GTP)== (詳細はIP-based protocol of the GPRS core network. Primarily it is the protocol which allows end users of a GSM or WCDMA network to move from place to place while continuing to connect to the Internet as if from one location at the Gateway GPRS support node (GGSN). It does this by carrying the subscriber's data from the subscriber's current serving GPRS support node (SGSN) to the GGSN which is handling the subscriber's session. Three forms of GTP are used by the GPRS core network. ;GTP-U: for transfer of user data in separated tunnels for each Packet Data Protocol (PDP) context ;GTP-C: for control reasons including: : * setup and deletion of PDP contexts : * verification of GSN reachability : * updates; e.g., as subscribers move from one SGSN to another. ;GTP': for transfer of charging data from GSNs to the charging function. GGSNs and SGSNs (collectively known as GSNs) listen for GTP-C messages on UDP port 2123 and for GTP-U messages on port 2152. This communication is direct within a single network, or in the case of international roaming, via a GPRS roaming exchange (GRX). The ''charging gateway function'' (CGF) listens to GTP' messages sent from the GSNs on TCP or UDP port 3386. The core network sends charging information to the CGF, typically including PDP context activation times and the quantity of data which the end user has transferred. However, this communication which occurs within one network is less standardized and may, depending on the vendor and configuration options, use proprietary encoding or even an entirely proprietary system. GTP version zero supports both signalling and user data under one generic header. It can be used with UDP (User Datagram Protocol) or TCP (Transmission Control Protocol) on the registered port 3386. GTP version one is used only on UDP. The control plane protocol GTP-C (Control) using registered port 2123 and the user plane protocol GTP-U (User) using registered port 2152. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「GPRS core network」の詳細全文を読む スポンサード リンク
|